Ball bearings WIB - Special drawing bearings - Examples of bearings for linear guide systems

SPECIAL BEARINGS Bearings for Textile Machines - Applications
	Diagrams and Designations	Descriptions	Applications
	BE500 / BE700 / BE1000	Bearing with two chamfers on the outside diameter. The chamfers as well as the outside diameter have a convex profile to reduce the friction surface.	The rails are profiled in order to have the bearing rolling either on the chamfer or on the outside diameter. Therefore parallel defects of the rails can be corrected.
	2 x DE10E00	Bearing with one-side chamfer on the outer ring. In order to reduce their size, the inner ring is chamfered as well.	The rail has a "V" profile. Two face-to-face mounted bearings are used for guiding.
	XG0M00	The shaft is at the same time the inner ring of the bearing (the raceway is machined on the full shaft). The outer ring has a notch with gothic section with convex profile to reduce the friction.	The raceway of the rail is a pressed bar.
	4 x OD400	One-side chamfer on the inner bearing ring.	The guide system is composed of four bearings. The rail is maintained by four balls in contact with the chamfer of the inner bearing ring. This assembly allows multidirectional loads on the carriage.
	MOS10ES00	Stainless steel bearing with an outer ring, which is wider than the inner ring in order to reduce friction. A double-side chamfer is machined on the inner ring.	An endless screw rotated on a double-side chamfer, machined on the inner ring.
	B1500	Bearing with convex profile.	The guiding is carried out by means of a "V" profile, machined in a rail.
Back to Special Bearings Menu Main Menu