Ball bearings WIB - Special drawing bearings - Examples of bearings for textile machines

SPECIAL BEARINGS Bearings for Textile Machines - Applications
	Diagrams and Designations	Descriptions	Applications
	O8M00-2ZB T9H	Cylindrical bearing with an inner ring which is wider than the outer ring. The shield on the cage side is black to indicate which face must be mounted towards the upper part of the spindle.	Bearing designed for a spindle of a wire coating machine.
	OT8MSD T9H	Double row cylindrical bearing with angular contact. The inner ring is wider than the outer ring.	Bearing designed for a spindle in a textile machine supporting higher radial loads than a standard O8M00 bearing at a slightly lower limiting speed.
	B801-2Z V	Full complement radial ball bearing (without cage) with higher admissible load and slightly lower speed limit than a bearing of the same dimension with cage.	Cam roller submitted to high loads and used in spinning machines.
	EOX17EM00-2RST V	Full complement ball bearing (without cage) with twin chamfer on the inner ring. The inner ring can be fixed by clamping.	Cam roller for a weaving machine drive system using cams.
	CM3,000-2Z Y	The outer ring of this bearing is wider than the inner ring and has a concave profile. The external part of this ring has been lightened to reduce the overall weight of the bearing.	Bearing for thread guide used on a weaving machine feeder.
	EMT6KR00-2RSR T9H	Special design with a two-part inner ring and an integrated shaft allowing for the grease lubrication of the bearing through a hole designed for this purpose.	Bearing used in a shuttle weaving machine. Located on the shuttle, the bearing must support high accelerations (250 strokes/min. with a speed of -10,000 rpm to +10,000 rpm).
Back to Special Bearings Menu Main Menu