HOME  |  Main Menu  |  Our Company  |  Recent News  |  Employment (1)  |  Contact Us  

Standard Bearings  |  Special Bearings  |  Technical Information  |  Applications         

 

    

 

 SPECIAL BEARINGS

  Areas of Specialty - Examples

 

   

 

 

O4MSD00 Y

Description:
Cylindrical bearings with an inner ring which is wider than the outer ring, and different heat treatment for the inner and outer ring: for the outer ring S1 (200°C), for the inner ring standard S0 (150°C).

Application:
This bearing is used on a drawing board. Each ring has undergone a different heat treatment, as the outer ring must resist significant shock loads.

 

 XGMU00 RSRZ T9H

Description:
Bearing with gothic profile on the outer ring, a shaft with a hole for lubrication acting as an inner ring and a cover.

Application:
Bearing used in a conveying unit in the wood industry.

 

 

 

O1500 RSR V

Description:
Full complement cylindrical ball bearing with a ring width of only 4 mm, a RSR seal and 3/32'' balls.

Application:
This bearing is mounted in a welding robot. The narrow space available dictates the use of a bearing without cage enabling a minimum width of the rings.

 

(W 3-2Z T9H)

Description:
Bearing with double-side chamfer and a "V" notch on the outer ring.

Application:
Bearing used in guidance systems. The guiding is carried out by the "V" notch or by the chamfers.

 

 

 

KOX9K00-2RSR
TNH

Description:
Cylindrical bearing with one chamfer on a side of the outer ring and a shaped flange (not rectified) on the other side. An undercut is machined for placing a fastening bolt on the inner ring.

Application:
Used on a manual tool for bending aluminum can rims.

 

OT1700 RSF2RSR T9H

Description:
Cylindrical bearing with two seals on one side for very high protection.

Application:
Bearing used in pedals and bottom bracket bearing assemblies (bicycles).

 

 

 

BMT800-2Z T9H

Description:
Double row small section bearing with a convex outer ring, which is wider than the inner ring.

Application:
Used in the graphic industry for paper belt conveyors.

 

E600-2Z

Description:
Bearing with two rectified large chamfers on the outer ring.

Application:
Bearing used on winding machines.

 

 

 

HJ800-2RSR Y

Description:
Cylindrical bearing with coated outer ring. The chemical composition of the coating has been chosen so as to avoid harmful smoke dissipation in case of fire.

Application:
Used for doors in underground railways.

 

HM300-2Z T9H

Description:
Bearing with a large notch (not rectified) on the outer ring. The inner ring is narrower than the outer ring.

Application:
Bearing used in the printing industry.

 

 

 

MOS10,3ES00

Description:
Cylindrical bearing with rectified profile on the inner ring. The outer ring is wider than the inner ring.

Application:
Used in linear modules with profiled screws.

 

OT5HMSD00 TSH

Description:
Self-aligning cylindrical ball bearing with an inner ring with two notches enabling the introduction of seals. The outer ring is narrower than the inner ring.

Application:
Bearing used as an insert in articulated heads.

 

  

 

 Back to
Special Bearings Menu
 

 

 Main Menu

 

 

 

 

WIB - Wälzager Industriewerke Bulle AG
A Division of RotoPrecision (Canada) Inc.
Champ-Barby 61, CH-1630 Bulle
SWITZERLAND

Contact Us

Tel: (+41) 26 919 11 22
Fax: (+41) 26 919 11 20